ETAS
Getting Started
ES411.1 - User Guide
41
6.2.3
Attaching ES400 Modules to Other Components Using the
Integrated Assembly Elements
The integrated assembly elements of the ES400 modules can not only be used
to connect modules to each other but also to connect them to other compo
-
nents.
Here, you connect the ES400 module to the component using the integrated
assembly elements. Screwing the two together works in the same way as con
-
necting several modules.
Fig. 6
-
7
Attaching a Module to Other Components with the Integrated
Assembly Elements
Rules on Attaching the Modules to Other Components
Observe the following rules when connecting the modules as required to other
components:
Preparing the Component
To cut the thread in the component:
1. Cut two M3 threads into the selected component.
The threads should be cut 8 mm deep.
NOTE
The two integrated assembly elements can only be accessed from the right-
hand side of the module and can only be turned using an Allen key.
You therefore have to screw the module to the other component from the
right.
You can only successively screw additional modules, but not module blocks,
onto the right-hand side of this module.
NOTE
Use the drilling template (see Fig. 6
