ETAS ES1651.1-B, User Manual

Page: 21 / 34

Installing I/O Modules 21
Fig. 4-5 Inserting the Ribbon Cable
To mount I/O modules
• Make sure you have four distance pins at hand
which have an external thread on one side.
• Lie the I/0 module on the distance pins you
have just mounted on the Carrier Board.
• Tighten the I/O module with the distancepins
(see Fig. 4-6 on page 22).
• Slot the connector of the relevant ribbon cable
into the box header of the I/O module.
Note
If you only want to mount one I/0 module, con-
tinue with "To mount the last I/O module"
on page 23.