ETAS BR XETK-S2.0, User Manual

Page: 14 / 78

ETAS Introduction
BR_XETK-S2.0 - User Guide 14
3 Introduction
This section contains information about the basic features and applications of
the BR_XETK
- S2.0 Interface Board (ETK = Emulator Test Probe), hints to sys -
tem requirements for operating the BR_XETK - S2.0, and other details.
3.1 Applications
The BR_XETK - S2.0 is an emulator probe for the Freescale MPC57xx and for the
STMicroelectronics EM57xx microcontroller family. It is a serial XETK with an
Automotive Ethernet (100BASE-T1) interface for use with the JTAG portion of
the Nexus debug interface (IEEE/ISTO 5001).
Fig. 3 - 1 BR_XETK - S2.0
An Automotive Ethernet media converter is required for the access to the BR_X -
ETK - S2.0 by the standard full duplex 100BASE-T Ethernet of the PC.
The BR_XETK - S2.0 can be used for rapid prototyping applications (bypass) as
well as for measurement and calibration applications.
NOTE
For supported MPC57xx microcontrollers, refer to chapter 7.1.3 on page 35.
BR_XETK - S2.0
ECU interface connector 10 pin SAMTEC
Power supply connector 6 pin MOLEX
Power supply for ED devices (VDDS -
BRAM)
min. 1.25 V
SBRAM sense Yes, on board or external sense
Pinless triggering Yes
Timer triggering Yes