8
Personalizing the Inflation of Your Mattress:
6.
Reapply bed linens (Maximum one sheet, one draw sheet, or one
incontinent pad). Place the individual on the Mattress Overlay in their
normal ly
-
ing position. NOTE: If the individual will be lying in the side
position at any
time while on the mattress, Star recommends that the
inflation adjustment
be performed while the user is in the side position, as
this position typically
has a greater immersion need.
7.
To adjust for the proper immersion level of each mattress overlay section,
slide your hand between the product surface and the individual’s lowest
bony prominence. Turn the valve counterclockwise to open, and release
air until the area of high risk is ¾ in. to 1 in. (2-3 cm) from the base of the
mattress section. Turn the valve clockwise to close. Repeat step 7 for the
remaining mattress overlay sections.
Linens:
Too many linens between the product and the individual will compromise skin
protection performance, prevent the individual from sinking in, and reduce pressure
distribution.
It is recommended that a maximum of:
•
One flat or contoured sheet, arranged loosely over the Mattress
Overlay.
•
If needed, a draw sheet for moving and transferring can be used.
•
If needed, one incontinent pad can be used.
Positioning:
Special Positioning: For an individual with special positioning needs while lying on
their side or back, a pillow or other positioning device can be placed beneath the
Mattress Overlay. Before placing any pillows, you must consult with your clinician or
healthcare provider.
Pillows:
NOTE: If the individual desires to use a head pillow, Star recommends placing
the pillow underneath the head section of the mattress instead of on top of the
mattress section, as this has been shown to better reduce peak pressure points.
