13
Troubleshooting:
Not Holding Air:
1.
Open valve(s) by turning counter clockwise and add air to the
ma
ttress using your black hand pump.
2.
Close valve(s) tightly by turning valves clockwise.
If still not holding air:
3.
Visibly check to see if there are any holes. If no holes are visible,
immerse mattress section (with the valves tightly closed) in sink or
tub of
water and look for air bubbles.
-
If pin-hole sized holes are found, use the repair kit that
came with your product and follow the repair kit
instructions.
-
If large holes or other leaks are found, see Warranty
Section.
Uncomfortable/Unstable:
- Make sure mattress section is not over-inflated. (see Instructions for Use).
- Make sure the air cells and the cover are facing “UP.”
Allow the user to lie on the product for a minimum of one hour to get use to the
texture of the product’s surface and immersion into the air cells.
Disposal:
There are no known environmental hazards associated with the components of the
products in this manual when properly used and disposed. Dispose of the product
and/or components in accordance with the applicable regulations in your jurisdiction.
DO NOT INCINERATE.
