Sharp edge
2 (2)
≥
Ø9,4 mm
≤
1 mm
Etac
Box 203, 334 24 Anderstorp
Sweden
Tel +46 371 58 73 00
Fax +46 371 58 73 90
www.etac.com
Wheels/Wheel axles
6.
A
B
- Check that the tyres, bearings and wheel axles are not
worn, and that the wheels turn easily.
Careless installation may lead to the retaining ring being
pulled out of shape and not springing back to its original
shape.
Check that the retaining ring is properly fitted in the
groove. Always use a new retaining ring!
- Check that the front forks rotate easily.
- When changing wheels, check that the groove for the
retaining ring has a sharp edge (see diagram B), and that
there is no excessive wear where the wheel bearings turn
on the shaft. Minimum shaft
diameter is 9.4 mm.
Check the wheel attachment. The distance between
The ends of the retaining ring must not exceed 1 mm
(see diagram A) after installation on the wheel axle.
