BM09201 Molift SMART 150 English - Rev E 10/2012
Page 7 of 20
Push handle
Battery holder /
control electronics
Emergency stop
Lifting column
Battery
Suspension
Lifting motor
Adjustable legs
Lifting arm
Chassis with
lifting column
fixing bracket
BACK
FRONT (forwards direc-
tion of travel)
Molift Smart 150 - use
The Molift Smart 150 hand control has two but-
tons (up and down). In addition there is a diode
which gives a light if the battery needs charging.
The legs are adjusted with pedals on the chassis.
Checklist before use
1. Check that the lifter has no apparent damage
or other faults.
2. Check that there are no loose parts, and ensure
that the lifting column is properly fixed and
that the locking handle is properly tightened.
3. Check that the legs
are moving in working
position only, mean-
ing that the legs do
not move inside work-
ing position with the
column mounted (see
fig A).
4. Check that the suspen-
sion is released from
the transport hook.
5. Check that the emer-
gency stop button is
not activated and that the lifter is functioning.
6. Check that you have sufficiently charged bat-
teries (that the battery diode on hand control
or chassis does not light).
7. Check that the service lamp gives a green light.
If yellow or red light, send lifter to service.
8. If there are any faults or irregularities, the lift-
er should be taken out of service immediately
and marked “out of order”. Contact your service
partner or local Molift representative.
Emergency stop
Electrical emer-
gency lowering
Battery
Battery indicator
Fig A
Battery
indicator
Up
Down
