background image

13

Molift MRS Quattro / www.etac.com 

Cleaning and disinfection

Clean on a regular basis. Clean surfaces with 

a damp cloth using an appropriate pH-neutral 

detergent. Do not use solvents or strong liquids, 

this may damage surfaces. Disinfection when 

needed; use isopropyl alcohol. Avoid abrasive 

cleaning products.

Make sure not to damage or 

remove labels when cleaning.

Reconditioning

MRS Quattro can be re-used. Follow assembly 

instruction to dismount and re-assembly. 

Recycling

MRS Quattro can be disposed of as metal waste 

without battery charger. Battery charger must be 

removed and disposed of as Electrical equipment.

Spare Parts

A list of spare parts is available on request.

Periodic Inspection

Periodic Inspection Scope

Periodic inspection is a visual examination 

(particularly of the MRS Quattro structure, bolts 

and person-support devices according to Periodic 

Inspection Report for MRS Quattro. This can be 

found on www.etac.com.

In the event of danger to safety, 

the MRS Quattro shall immediately 

be taken out of service and marked 

clearly with “out of order” and 

shall not be used until the MRS 

Quattro is repaired

Periodic Inspection shall be performed at least 

once a year or more frequently if required by local 

requirements. The inspection should be performed 

by service personnel authorized by Etac. Contact 

Etac for training and authorization or recommen-

dation of an approved service partner. 

When performing a periodic inspection, the 

inspector shall fill out the inspection report for 

MRS Quattro. The reports should be retained by 

the person(s) responsible for servicing the hoist. If 

the inspection reveals defects and damages, the 

owner shall be notified and a copy of the report 

should be sent to Etac, [email protected].

When periodic inspection is completed the inspec-

tor shall mark the MRS Quattro with a sticker on 

the control label showing the date when periodic 

inspection is performed and a label (with 6-digit 

ID from Etac or distributor) showing who has per-

formed the periodic control. The control label can 

be found on the post, and this will then indicate 

when next service should be performed.

Mark label 

with month 

and year of 

inspection

Maintenance

Summary of Contents for Molift MRS Quattro

















Reviews: