42
Etac / Lille Viking / www.etac.com
5.4 Dismounting the bars
After having dismounted the supporting motor, the front and rear fastenings must be dismounted in order to fold the wheelchair.
1. Loosen the finger screw.
2. Push the movable bar into the cross bar
3. take the cross bar to the left and lift up.
1
2
3
4. Now, you can move the whole front fitting and the pulling bar to the front between the footrests on the wheelchair.
4
5. Loosen the finger screws on the rear fitting and lift up the whole mounting bow. What are now left on the chair, are two brackets on
each side. You may leave these on the wheelchair.
6. Loosen the finger screw and remove the control box. The wheelchair can now be folded.
5
6