eta Trinity 3607, Instructions For Use Manual

Page: 14 / 36

– The appliance cannot be used in bathrooms in zones 0, 1 and 2 HD 384.3 S1! It must
not be used in close proximity of bathtubs, a shower or a swimming pool.
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored).
– Use the appliance in the working position only at places with no risk of turning over and in
a sufficient distance from objects (such as curtains, drapes, etc. ), heat sources
(e.g. fireplace, heater, stove, cooker, radiators, hot air ovens, grills ) and wet surfaces
(e. g. sinks, wash basins ).
– Make sure that impurities do not enter into the appliance (e.g. clouds of dust, hair etc. ).
– Do not put the switched on fan on soft surfaces (e.g. on a bed, towels, wipers, carpets ).
– There must not be any device with open flame in the flow of the air coming out from the
appliance because of danger of burning process interruption.
– Never let the flow of air blow on you (or animals) for an extended period of time. It may
cause health problems.
– Never put the power cord on hot surfaces or do not let it hang over the edge of a table or
a work top. Plugging or pulling the power cord e.g. by children can result in tilting over or
drawing the appliance down and serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– Do not wind the power cord around the appliance, this will extend life of the power cord.
– Use this appliance only for the purpose for which it was designed as specified in this user‘s
manual. Never use the appliance for any other purpose.
– The producer does not guarantee any loss caused by improper handling of the appliance
and its accessories (e. g. electrical accident, fire ) and its guarantee for the appliance
does not apply in the case of non–compliance with the safety instructions above.
II. DESCRIPTION OF THE APPLIANCE
A – Fan body
A1 – Air flow openings
A2 – Base
A3 – Power cord
B – Control panel with LED display
B1 – Oscillation adjustment button
B2 – Timer setting button
B3 – ON / OFF button
B4 – Speed setting button
B5 – Mode button (NORMAL/NATURAL/SLEEP)
C – Remote control
C1 – Oscillation adjustment button
C2 – Timer setting button
C3 – ON / OFF button
C4 – Speed setting button
C5 – Mode button (NORMAL/NATURAL/SLEEP)
III. INSTRUCTIONS FOR USE
Before first use, remove any packaging and protective material (including any protective film)
from the appliance and accessories.
14
GB
/ 31