eta Sucha 7246, User Manual

Page: 14 / 32

II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A1 – ironing board A4 – storage board
A2 – control light A5 – space for power cord wind-up
A3 – thermostat regulation wheel A6 – power cord
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the iron with the accessories. Remove
possible labels, protective foils or covers before the first use.
Ironing temperatures
– Sort laundry and iron according to the instructions for treatment
(e.g. manufacturer‘s recommendation – a label on clothes ). If the instruction is
missing and you know the material of the clothes, follow the table on picture 3. The table
applies only to materials only, not to possible decorations, material treatment, etc.
– Start to iron from the lowest temperatures to higher temperatures. If clothes consist of e.g.
two and more materials or if it is treated by stringing, purls, relief , always iron according
to the material with the lower temperature only. If you do not know the material, find the
suitable place that is not visible when wearing and try suitable temperature for ironing at the
place.
– When ironing woollen fabrics, we recommend ironing on the back side of the fabric and
you can iron virgin wool through additional cloth. Velvet and similar fabrics can be ironed
in one direction ( you will prevent creation of glossy areas ).
Ironing
Put the iron to the rest position (fig. 4).
Set the level against the mark on the container on the regulation wheel A3 according to the
selected fabric (fig. 2). Plug the power cord A6 to a socket. When the control light A2 goes
out, the proper temperature has been reached.
Warning
The regulation wheel
A3
(fig. 2) is marked with international symbols that recommend
the optimum ironing temperature and they are the same as marking on some types of
laundry and textiles (fig. 3). When the temperature is increased from the cold state or if the
temperature is set from higher to lower, we recommend waiting for a while for stabilization
of the ironing plate temperature .
Different thermal expansivity of the ironing board and cover may cause crackling in the iron,
especially when heating up and cooling down. This is not to be considered a fault.
Storage
After finishing ironing let the iron cool down. Wind the power cord A6 on the back side of
the cover A5 and put the iron to the rest position (fig.5).Put the appliance at a dry and dust
free place, out of reach of children and incapacitated people.
IV. MAINTENANCE
Unplug the iron from power supply by taking the fork of the power cord out of the
socket! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers,
diluting agents or other solvents)!
Wipe all dirt from the ironing board with a damp cloth
or you can use a nonabrasive (liquid) cleaning agent.
14
GB
/ 27