eta PelletsCompact 20-32 kW, Operation

Page: 15 / 76

ETAtouch controller Getting to know the control system
15
5 ETAtouch controller
5.1 Getting to know the control
system
Get to know the control system
Take your time and read the following chapter
carefully. It describes the functions and settings of the
ETAtouch control for your heating system. If you are
familiar with these, it will be easier for you to make ad-
justements, even without consulting the manual.
Design of the control system
The individual components of the heating system, e.g.
buffer, hot water tank or heating circuit are shown in
the control system as "function blocks". These are
listed in the uppermost row on the screen. The
respective user interface is opened with a single tap of
the finger.
Fig. 5-1: ETAtouch control system function blocks
1 Currently selected function block
2 Other function blocks, e.g. hot water tank, heating
circuit, solar heating system
3 Scroll to other function blocks (displayed if not all
function blocks can be displayed simultaneously)
4 Help button. Details can be found in chapter 5.1.3
"Integrated help" .
5 Settings of the selected function block
6 Date and time
7 Current outside temperature
8 Status of the remote control for the boiler (via
www.meinETA.at), see chapter
5.1.7 "meinETA
remote control"
9 System configuration