eta PelletsCompact 20-32 kW, Operation

Page: 17 / 76

ETAtouch controller Getting to know the control system
17
5.1.2 Text menu
Adjust parameters in the text menu
To enter the text menu, tap in the upper left on the
symbol, followed by . In the text menu, the
required parameters for the control system of the
function block are listed. Modifiable parameters are
indicated by the
symbol.
Fig. 5-4: Text menu
1 Parameter
2 Current value or setting
3 Editable parameter
Changing a parameter is simple. Select this and tap
the
symbol. The settings window appears.
Fig. 5-5: Settings window
1 Factory setting and adjustment range
2 Reset to factory setting
3 Save and close
4 Cancel and close
The default setting and the setting range are displayed
on the right side. The new value is entered with the
keypad, and stored by pressing the [Save] button.
Resetting to factory settings is done by pressing the
[Factory settings] button. To cancel and close the
window, tap the arrow on the left side of the screen.
Only modify parameters whose function you're
familiar with. Before making any changes, read
the relevant section of the user manual or configura-
tion manual, or open the integrated help feature. If you
cannot find sufficient information about a parameter,
please consult a specialist.
Commonly used parameters can be found in the
settings
Commonly used parameters can be found in the
function block settings (
button). There, the
parameters are identified by the symbol and can be
adjusted by tapping. This saves you having to search
through the text menu for these parameters.
5.1.3 Integrated help
How to use the integrated help
Use the integrated help to find information. This
appears when the
button is pressed. If help is
activated, annotations will appear in the user interface
in blue boxes.
Fig. 5-6: Activated help in the user interface