eta LAVADO, Instructions For Use Manual

Page: 16 / 46

Recommendation
- When kneading, use the substances at the room temperature.
- First mix yeast in lukewarm milk. As soon as the dough gets into the shape of a ball, stop
kneading as you are used to, or leave the dough rise according to the recipe.
- When preparing tough dough, we recommend putting loose ingredients in the bowl first
for better mixing and then adding liquid ingredients.
- When preparing more dough, prepare it in several doses.
Warning
- If necessary for inserting, turn the beaters or kneading hooks slightly.
- The plastic ring on a beater or a kneading hook remains invisible. The beater or the
kneading hook cannot be inserted further to the appliance.
- Switch on the appliance only when the accessories
B
,
C
are immersed into the processed
ingredients.
- For mixing or whipping, only one kneading hook or whipping beater can be used in a
suitable container. Choose the size of the container according to the amount of the
prepared mass.
- After 10 minutes of continuous operation wait for about 15 minutes, which is necessary
for the drive unit to cool down.
VI. MAINTENANCE
Before any handling with the appliance or its maintenance, switch off the appliance
and unplug the power supply cord from the electric socket. Do not use rough and
aggressive detergents!
Clean the drive unit by soft and wet cloth with a little detergent.
Make sure that water does not get inside the appliance. Wash the other accessories right
after use in hot water with a little detergent added, rinse them with clean water and wipe
them till dry (you can also use a dishwasher). Some ingredients can colour the accessories
in some way. But this does not affect the function of the appliance and it is not a reason for
a claim. This colouring usually disappears in some time. Never dry plastic moldings over a
heat source (e.g. heater, stove, radiator).
Storing the appliance and accessories
After cleaning, wind the power supply cord
A4
over the back part of the drive unit
A
. Store
the drive unit at a dry, dust-free place, out of reach of children and legally incapacitated
people.
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authorities or at a collection site. Fines can be imposed for improper disposal of
this type of waste in agreement with the national regulations. If the appliance is to be put
out of operation, after disconnecting it from power supply we recommend its cutoff and in
this way it will not be possible to use the appliance again.
16
GB