20
www.eta.co.at
Cleaning (customer)
Cleaning and maintenance
Manually operate the lever and check its ease of
movement on both sides of the boiler. Lubricate the
spring, guide and bearing with a heat-resistant
lubricant.
Fig. 2-36: Lever
Check the gap between the sensor and the spring arm
on both sides of the boiler. It must be 2 mm.
Fig. 2-37: Position sensor
Clean the housing of the frequency converter
Clean dust and dirt from the frequency converter
housing.
Fig. 2-38: Frequency converter
Attach covers
Re-install the covers on both sides of the boiler.
Fig. 2-39: Cover
Fig. 2-40: Cover
