ATTENTION
In case if your animal has a health problems (for example, dermatological disease), contact
and consult your veterinary first before using the appliance.
V. REMOVING THE DUST CONTAINER AND FILTERS
DUST CONTAINER REMOVAL
When taking out and disassembling the dust container
B
follow the procedure indicated
in Fig. 4. Dispose of dirt contained in the dust container with regular household waste. An
emptied and cleaned container is to be put back into the vacuum cleaner in reverse order.
INPUT FILTERS REPLACEMENT
To remove the input filter, follow the procedure indicated in Fig. 4. To fit a new input filter in
the vacuum cleaner, proceed in reverse order.
OUTPUT FILTER REPLACEMENT
To remove the input filter, follow the procedure indicated in Fig. 3. To fit a new output filter
in the vacuum cleaner, proceed in reverse order.
VI
. CLEANING AND MAINTENANCE
Caution
– When you are vacuuming very fine dust, the filter pores might get clogged. This
reduces the air flow and the suction performance deteriorates. In such a case, the
filters need to be cleaned even though the container is not full yet.
Treat surface of the appliance with a soft and damp cloth, do not use coarse and aggressive
detergents!
Accessories
After any vacuuming it is recommended to check visually the brushes or collectors
for possible impurities. If there are some impurities, remove them.
Cleaning the TURBO nozzle
Cut the threads and hairs with scissors. Turn on the vacuum cleaner. The cleaner vacuums
the cut hairs and threads. In case hairs or threads got tangled up around the attachment of
the brush cylinder and cannot be removed with the above-mentioned steps, it is necessary
to remove them with a suitable tool (e.g. tweezers).
Dust container
Clean the surface and the inside of the container
B
with a soft wet cloth. Rinse the separator
B8
and the seal under running water. Allow all the parts to dry out properly before their re-use.
Input and output filters
Rinse the filter
B6
under running water. Allow them to dry out properly before their re-use.
Shake out the input HEPA filter (
A9
,
B5
) gently, or blow it out. If the HEPA filter is very dirty,
you can rinse it under running lukewarm water. Allow it to dry out properly.
20
GB
/ 38
