B – Control panel
B1
– On/off button
B2 – Blowing mode button
B3 – Timer button
B4 – Inner blades oscillation button
B5 – Blowing speed setup button
B6 – Cooling button
B7 – Blowing speed setting icon
B8 – Activated cooling icon
B9 – Activated blades oscillation icon
B10 – Timer icons
B11 – On/off icon
B12 – Normal mode icon
B13 – Natural mode icon
B14 – Sleep mode icon
C – Remote control unit
C1
– On/off button
C2
–
Cooling button
C3
–
Blowing speed setup button
C4
–
Blowing mode button
C5
–
Inner blades oscillation button
C6
–
Timer button
D – Cooling box
(300 ml)
E – Tightening spanner
III
. PREPARATION FOR USE
Remove all the packing material and take out the appliance. Remove all possible adhesion
foils, stick–on labels or paper from the appliance. Place the appliance on a suitable flat
and dry surface. Leave free space for due ventilation. Vents in the appliance ensure air
circulation during ventilation and they must not be covered or blocked in another way.
Make sure that the power cord is not damaged and that it does not lead any sharp or hot
surfaces. The electric socket must be easily accessible so that the appliance can be easily
disconnected from power supply if danger appears. Plug the power cord connector to
an electric socket.
Moderate smoke for a short time does not mean any defect. Now the
appliance is ready for operation.
To fill water, take out the water tank and pour clear water inside, at the level between MIN
and MAX marks. For the maximum cooling effect we recommend using cold water. For the
best results use cooling boxes
D
inserted in the tank, after having been sufficiently cooled
down in your freezer. You may also add ice cubes in the water. This will help keeping the
water in the tank cold for a longer time.
The appliance operation principle consists in pumping water by
A8
pump from
A5
tank
through water discharge cover holes
A12
to the cooling pad
A10
, on the surface of which
the water flows down through a flow of air, thus becoming colder (depending on the water
temperature), with a high relative humidity. The water flows back to the upper part of the
tank to
A6
container. Then the water flows down through
A7
hole back to
A5
tank.
INSTALLATION OF WHEELS
The product includes 4 wheels
A4
and a tightening spanner
E
to fix the wheels to the
cooler body
A
. Please proceed according to Fig. 3. Two wheels have arresting locks
(wheels A, Fig. 3) used to secure the appliance against unwanted move. For a better
stability, we recommend installing the wheels in a cross shape according to Fig. 3.
GB
24 / 46
