EN - 60
EN
For start the vacuum cleaner in the modes below, cleaner must be on and in standby
mode. The main switch
A14
must be in position
I
.
Auto mode
At first, the vacuum cleaner cleans along the walls and subsequently it divides the room
into separate areas. Then it gradually cleans the separate areas of the room, combining all
movement modes. This mode is recommended to use on a carpet.
Click the button
B5
on robot or
F3
on remote control to start Auto cleaning mode.
Effective cleaning
At the beginning, the vacuum cleaner cleans the room along the walls and then the
cleaning is made by gradual movement of the vacuum cleaner across the room in parallel
paths. During the cleaning, GYRO NAVIGATION technology evaluates the movement of
the vacuum cleaner across the room. It is the most effective way of cleaning in the shortest
time possible.
Click the button
B2
on robot or
F5
on remote control to start Systematic mode.
Spot mode
This mode is applicable for an area of highly concentrated dirt or dust. In spot cleaning
mode, robot focus on one area for cleaning.
Click the button
B4
on robot or
F6
on remote control to start Spot mode.
Cleaning takes about 1:50 min. and when it is finished robot stay on palce, where finished
cleaning.
Summary of Contents for FALCO 1515
Page 127: ......
Page 128: ...e 14 2019 DATE 29 4 2019...
