GB - 56
GB
Remarks
– If the QR code is not active, search for the application manually by name.
– To download the English version of the application, you must have the English
language set as the system language on your smart device.
"ETA SMART"
application allows comfortable and intuitive control of your vacuum cleaner
from your smart device. When pairing the device and also during follow-up use of the vacuum
cleaner, please follow the instructions directly in the application. The vacuum cleaner has an
indicator of the connection to the Wi-Fi network
A12
. If
A12
indicator lights green, the vacuum
cleaner is connected to Wi-Fi. If it flashes slowly it is not connected. When the vacuum
cleaner is paired with the Wi-Fi network, the
A12
indicator flashes quickly.
Remarks
–
If you have trouble pairing, first:
•
Verify that the Wifi network settings and the operating system of the smart
device meet the specified requirements
•
Restart the vacuum cleaner and smart device and repeat the process;
•
If possible, try restarting the Wifi router itself;
•
Verify that the vacuum cleaner is within the range of the Wifi signal;
•
Check whether the vacuum cleaner has been charged.
– The WiFi network name and password for connection must contain only alphabetic
characters (a-z, lower case or capitals) and numbers (0-9).
–
Some pairing problems can be caused by the saturation of Wifi networks and set-
up channels (especially in housing estates), causing collisions and outages. If such
failures occur, it usually helps to restart the vacuum cleaner itself or the Wifi router.
At the same time, for stable operation, your Wifi signal needs to be strong enough to
cover the entire area of the intended use of the vacuum cleaner.
– If your smart device is running
Android 6.0 and above
, you need to have location
detection turned on.
7. VACUUM CLEANER MAINTENANCE
Carry out maintenance and cleaning regularly, depending on the frequency of use and
the amount of cleaning. In a more polluted environment (a pet household), more frequent
maintenance will be required.
Failure to carry out maintenance may damage the
vacuum cleaner and its components!
7.1 CHARGING CONTACTS CLEANING
Switch off the vacuum cleaner and disconnect the charging station from the power
supply!
Clean the charging contacts (
A3
,
D3
) on the vacuum cleaner and on the station
with a soft dry cloth. Clean at least once a month.
Do not use aggressive cleaning
agents or oils to clean the contacts.
Summary of Contents for Aron 2512
Page 132: ...e 23 2020 DATE 27 05 2020...