GB - 53
GB
1. Aim the remote control towards the vacuum cleaner and press the
F4
button. The value
for setting the hour in the first line of the display starts flashing.
2. You can now use the
F3
buttons (up and down arrows) to set the scheduled cleaning
hour value. Use the
F3
buttons (left and right arrows) to switch between setting the
hours and minutes.
3. Switch the setting for minutes (the minute value will flash) and set the minute value of
the scheduled cleaning (the minute setting is in 15-minute increments).
4. To confirm and save the set scheduled cleaning time, press the button
F4
. The set value
will be permanently lit on the display.
Note
To cancel the scheduled cleaning, set the "00:00". value on the display.
5.6 USING THE MOPING ATTACHMENT
1. Attach the
G3
mop to the lower part of the moping
attachment correctly. Soak and wring the mop before use.
2. Open the rubber stopper
G1
and fill the mop attachment
with water.
3. Place the mop attachment in place in the vacuum cleaner.
Summary of Contents for Aron 2512
Page 132: ...e 23 2020 DATE 27 05 2020...