GB
26 / 43
Warning
– The vacuum cleaner can be charged only if it is placed in the extension attachment
D
.
– Let the vacuum cleaner recharge as soon as its suction performance is weaker.
–
When using the vacuum cleaner for an extended period of time or in a hot environment, the
accumulator might be too hot for charging. Let the accumulator cool down prior to charging.
– If used daily, do not unplug the adaptor from the socket. This will make sure that the
appliance is fully charged at all times. The battery is protected from overcharging. If you
are going to be absent for a longer time (more than one day), unplug the adaptor from
the mains so as to optimize the battery life.
ETA0449
–
When charging the accumulator for the first time or after a long period of storage, it will
be charged to approx. 80% of its capacity. The accumulator charges to 100% after it is
discharged and then charged again.
– To ensure a longer battery life, we recommend that the battery be fully discharged by
using the appliance and then fully charged four times a year.
INSTALLING THE CHARGING STAND ON THE WALL
To install the charging stand
G
on the wall, use the holes
G2
on its back. Mount the charging
stand
G
on the wall using a suitable connecting material.
IV. USE OF VACUUM CLEANER (Fig. 7)
Let the vacuum cleaner charge sufficiently prior to using.
Caution
When you are using the floor nozzle
E
and the rotary brush will get blocked, turn off the
vacuum cleaner, remove the cause of the blocking (clean the rotary brush) and resume
vacuuming.
CONTROL
ON/OFF button (A1, D1)
-
vacuum cleaner ON/OFF switch
Suction power control (D2)
when pressed once
- low suction power
when pressed twice
- high suction power
Caution
–
When the vacuum cleaner is switched on, it is always at high suction power.
–
The suction power may only be adjusted if the vacuum cleaner is put in the extension
piece
D
.
–
If you want to vacuum at the low suction power level and only use the handheld vacuum
cleaner, first put the vacuum cleaner in the extension piece
D
and switch it on. Then set the
low suction power, and remove the running vacuum cleaner from the extension piece
D
.
The vacuum cleaner will then operate at low suction power level until switched off (or until
the battery is discharged).
