eta 355690000, User Manual

Page: 110 / 120

If the drying process is completed, open the
loading door and wait for it to cool down.
1. Open the kick plate cover as shown.
2. Unlock the exchanger cover by turning
in the direction shown with arrows.
3. Take out the exchanger cover as shown.
4. Clean the front surface of the
exchanger as shown.
5. Fit the exchanger cover as shown.
6. Lock the exchanger cover by turning in
the direction shown with arrows.
7. Close the kick plate cover as shown.
WARNING:
DO NOT CLEAN
WITH BARE HANDS SINCE THE
EXCHANGER FINS ARE SHARP.
THEY MAY HURT YOUR HANDS
5.4 Cleaning the Humidity
Sensor
Inside the machine, there are humidity
sensors that detect whether the laundry is
dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. If the machine is still hot due to the
drying process, wait for it to cool down.
3. Using a soft cloth soaked in vinegar,
wipe the metal surfaces of the sensor
and dry them.
IMPORTANT: CLEAN THE METAL
SURFACES OF THE SENSOR 4
TIMES A YEAR.
IMPORTANT: Do not use metal tools
to clean the metal surfaces of the
sensor.
WARNING: Due to the risk or fire and
explosion, do not use solution agents,
cleaning agents or similar products
when cleaning the sensors.
5.5 Cleaning the Inner Surface
of the Loading Door
IMPORTANT: DO NOT FORGET TO
CLEAN THE INNER SURFACE OF
THE LOADING DOOR AFTER EACH
DRYING PROCESS.
Open the loading door of the dryer and
clean all of the inner surfaces and the
gasket with a soft, damp cloth.
30
EN
/ 37