![background image](http://html.mh-extra.com/html/kenmore/81042/81042_operating-instructions_183805001.webp)
settings may be used with any cycle setting. The
AIR
FLUFF-NO HEAT
setting can be used only in the Timed
Dry cycle.
AIR FLUFF-NO HEAT
setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
The Automatic and Timed Dry cycles end with a cool
down period. The heat automatically turns off and
the load continues to tumble during the cool down
period. This reduces wrinkling and makes items
easier to handle during unloading.
Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying time.
OPERATING INSTRUCTIONS
81042/91042
81052/91052
Before Operating Your Dryer
Read your dryer Use and Care Guide.
It has
important safety and warranty information. It also has
many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer Use and Care
Guide before operating this appliance.
Operating Steps
Read
Drying Procedures
in your Use and Care
Guide. It explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer.
If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Temperature and Cycle Signal controls.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer.
Turn the Turn to Start control
clockwise to ON.
Hold for 1-2 seconds and
release.
8. When Cycle Signal control is on, a signal will
sound at the end of the cycle.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
the Air Fluff-No Heat cycle only.
The
REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT
, and
KNITS/DELICATES-LOW HEAT
temperature
Printed in U.S.A.
P/N 134014200 (0011)