EN
EN - 78
Water Hardness level
Digital display
stalls
Salt
consumption
(gram/cycle)
Regeneration occurs
every x programme
sequence
3)
°dH
1)
mmol/l
2)
0 – 5
0 – 0.9
H1
0
OFF
6 – 11
1.0 – 2.0
H2
9
10
12 – 17
2.1 – 3.0
H3*
12
5
18 – 22
3.1 – 4.0
H4
20
3
23 – 34
4.1 – 6.1
H5
30
2
35 – 55
6.2 – 8.0
H6
60
1
1)
German degree of measurement for the water hardness
2)
millimol, internationel unit for water hardness
*)
factory setting
3)
Every cycle with a regeneration operation consumes additional 2 litres of water,
the energy consumption increases by 0.02 kWh and the programme extents by 4 minutes.
Water softener
•
The hardness of the water varies from place to place.
•
If hard water is used in the dishwasher, deposits will from on the dishes and utensils.
•
The appliance is equipped with a special softener that uses a salt specifically designed
to eliminate lime and minerals from the water.
Loading the Salt into the Softener
•
Always use salt intende d for use with dis hwasher.
•
The salt container is located beneath the rack and should be filled as follows:
ATTENTION!
Only uses alt specifically designed for use in dishwa shers! All other types of
salt not specifically designed for use in a dishwas her, especially tablesalt, will
damage the water softener. In case of damage s ca used by the use of unsui
tabl e salt the manuf acturer does not give any warranty or is liable for any cause
damages. Only fill withs alt just before starting one of the complete washing
programmes. This will prevent any grains of salt or salty water, which may have
been split, remai ni ng of the bottom of the machine for any period of time, which
may cause corrosion. After the first wash cycle the control panel light expires .
WARNING:
if salt is not added, it will cause poor cleaning effect of dishes, and will produce scale.
