Once you see a significant decrease in the volume of the produced steam, the water tank
must be replenished (see “
Water filling/adding
”).
Note
– After finishing the work, or when you do not use the appliance, please move the safety
catch
A2
preventing unwanted on-switching to the locked position – see Fig. 1.
– After the first use or after interrupting the cleaning for several minutes, direct the steam
flow into the container to remove excessive water from the accessories (such water is
produced by the steam condensation). When steam is produced, always aim the steam
flow down at the floor.
– While the appliance is connected to the mains, the water tank content is kept heated
(indicator light
A5
will turn on and off alternately), producing steam. However if you
see that the volume of the produced steam is becoming lower, interrupt the steam
activation for several minutes, and then continue.
– The appliance is intended to be cleaned while its power cord is connected to the
mains, however it is possible to clean the heated up appliance for a short time also
when disconnected from electric power.
–
When the steam cleaner is inclined, and steam is discharged, hot water will start
squirting from the nozzle along with the steam. Thereby the water level in the tank
will drop, and the total time of steam development will be shorter. Moreover, hot water
instead of steam may be unwanted, for example when cleaning absorbent surfaces.
After you finish cleaning:
1) Disconnect the power cord from the mains
2) Discharge the excessive pressure
3) Let the appliance cool down
4) Unscrew the pressure relief valve
A3
5) Pour out the excessive water, and let the water tank dry out.
Examples of use of accessories
This appliance very effectively disinfects various surfaces and materials, removes dirt,
dissolves grease, wipes grime, etc. Wide assortment of accessories also allows cleaning
bathrooms, sinks, toilettes, radiators, grills, grouts, window, mirrors, upholstery, vehicle
interiors and wheels, etc.
Flexible extension hose (B1)
–
Thanks to its sufficient length and high flexibility, cleaning
of hard-to-reach spots is possible;
Concentrating cone nozzle (B2)
–
Basic adapter for universal cleaning; allows partial
extension of the operation range, and is also used
as the basic adapter to mount accessories
B4-B5
Flat spraying nozzle (B3)
–
in combination with the sleeve
B3b
or without it, you can
clean (or mildly iron) upholstered furniture, such as couches,
armchairs, pillows, clothes, etc.
Squeegee for windows and flat surfaces
–
to be particularly used to clean windows and
various non-glass flat surfaces
Brass round brush (B4)
–
To clean very tough dirt from small and very resistant surfaces
(for example metal surfaces); unsuitable for cleaning sensitive
surfaces!
GB
25 / 43
