III. PREPARATION FOR USE
Unpack the scale from packaging. before the very first use, wash that part of the appliance
that may come in contact with foods..
Installation of batteries
Open the battery compartment cover on the bottom part of the scale and insert
3 AAA batteries; pay attention to correct polarity and close the cover.
V. OPERATION INSTRUCTIONS
(fig. 2)
Weighing
1. Put the scale on suitable flat surface (see
I. SAFETY PRECAUTIONS
).
Do not put
things you want to weight on the plate before you turn the appliance on!
2. Press the button
ON/OFF
to turn on the scale (the display will show all symbols for
about 2 seconds).
3. When the display shows
0 g
, the appliance is ready for weighing.
4. Put the food (thing) you want to weigh in the centre of the plate
A5
and wait for settling
the value shown on the display.
5. You can use
UNIT
to change the weight unit at any time during weighing.
6. After weighing, you may turn off the scale by pressing the
ON/OFF
button or the scale
will turn off automatically after 30 seconds.
Change to weight units
(
A4
)
The scale may indicate weight in the following units: g gram, lb oz – pound/ounce.
Repeatedly press the
UNIT
button to change the units as follows: g / lb oz.
Four modes are shown on the display:
Data on display
Mode
Indication
1500
g
1500 grams
3: 4.9
lb oz
3 pounds and 4.9 ounces
kg = kilogram 1 kg = 2,2 lb
lb = poud (british unit of weight) 1 lb = 0,454 kg
Tare mode
(
A3
)
If you want to use the scale for additional weighing (adding various ingredients) or if you
want to use a bowl for weighing of product, press the
TARE
button to reset the display
before adding each ingredient or putting the bowl on the plate. When the display shows 0 g
/ 0 lb oz, the appliance is ready for additional weighing.
Note
If you press the
TARE
button when the appliance is loaded by the product, the weight
reading will reset on the display. If all products are taken away from the weighing plate,
a negative value will appear on the display.
Exceeding loading capacity of the scale
Maximum weight for a product weighing is 5000 g. The display will show error message in
case the weight of the product on the plate exceeds 5000 g. It means the product weight
exceeds the loading capacity of the scale.
12
GB
Summary of Contents for 0777
Page 2: ...2 1 2...
Page 31: ...eta 0777 I VII 31 UA...
