– If the power cord of the appliance is corrupted, it has to be replaced by the
producer, its service technician or a similarly qualified person so as to prevent
dangerous situations.
– Never use the appliance for any other purpose than for the intended purpose described
in these instructions for use!
– The producer is not responsible for damage caused by improper use of the appliance
(e. g.
burning, scalding, fire
) and its guarantee for the appliance does not apply to
situations when the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE
(fig. 1)
A – electric kettle
A1 – on/off button (steam sensor switch*)
A5 – lid
A2 – control light
A6 – lid lock button
A3 – water gauge
A7 – filtration sieve
A4 – handle
B – removable stand
B1 – central connector
B2 – power cord
* The steam sensor ensures automatic switch off the appliance after reaching the boiling
point.
III. INSTRUCTIONS FOR USE
(fig. 1)
Remove all the packing material and take out the electric kettle with the stand. Remove all
possible adhesion foils, stick-on labels or paper from the appliance. Before the first use,
fill the electric kettle with clean water to the maximum level, turn it on and let the water
boil. Then pour out the water and repeat the procedure several times (at least five times).
Unwind the necessary length of the power cord
B2
from the storage space of the stand
B
.
Place the stand on a suitable surface and plug the fork of the power cord to the electric
socket. Hold the kettle
A
on the handle
A4
. Open the lid
A5
by pressing the lock button
A6
. Fill the kettle with drinking water. The minimum and maximum amount of water is
marked on the water gauge
A3
. Close the lid by snapping. Put the electric kettle on the
stand and turn it to the
I
position by the
A1
button. Function of the electric kettle is
signaled with the control light
A2
. After boiling the appliance switches off automatically.
Before reaching the boiling point, you can switch off the appliance by turning the
A1
button to the
0
position. Always use fresh water for boiling.
Attention: When heating water, the lid must be closed, otherwise the steam sensor
will not be working.
In bigger tilting of the electric kettle backwards, particularly when it is filled up to
maximum, water can flow out from the electric kettle in the area below the on/off button.
This does not affect safety or other functions and it does not mean any failure of the
electric kettle. In the case of tilting the electric kettle with hot water there is a risk
of scalding. Therefore do not tilt the electric kettle.
IV. MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord out of
the socket! Clean the kettle only when it is cooled down! Do not use rough and
aggressive detergents!
The casing of the electric kettle and the heating bottom are made
12
GB
Summary of Contents for 0596
Page 2: ...2 1...
