III. PREPARATION AND ASSEMBLY
Remove all packaging material, remove the accessory. Remove all adhesive foils, stickers
or paper from the appliance. Wash all parts which will come in touch with food in hot water
with soap, rinse them thoroughly with clean water and wipe dry or let dry before first use.
Assebmling and disassembling the dish (A4)
Put the knife attached to the nut
A1
into the plastic base of the container. Arrest it by
turning the nut clockwise, until it fits onto the sealing. Disassemble the dish reversely.
Attaching and removing the dish (A4) (Fig. 2)
Remove the cover for the mixer outlet first. Container has two arrest protrusions on the
inner side of the plastic base
A3
. Put the container on the motor unit, so that the arrest
protrusions fit into the grooves on unit. Arrest it by turning dish counter-clockwise. The
safety mechanism will be turned off and the appliance is ready to use. Proceed reversely
when removing the dish.
Attaching and removing the lid and lid plug (A5, A6)
Push the lid slightly onto the container
A4
and turn it gently. Put the plug
A6
on the lid
A5
by sliding it down. Remove it reversely.
A5
A6
A4
A3
A1
A2
1
2
1.
2.
14
GB
/ 26
