![eta 0068 Instructions For Use Manual Download Page 15](http://html1.mh-extra.com/html/eta/0068/0068_instructions-for-use-manual_2430204015.webp)
15
GB
/ 31
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion (
spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored
).
–
Always use the grinder only in places where there is no danger that it could overturn.
–
Be careful to use only good quality coffee beans and check whether they are free of any
articles which could damage the grinder.
articles which could damage the grinder.
– Never remove the lid or filler while there is some coffee being ground.
– Never remove the lid or filler while there is some coffee being ground.
–
–
The grinder filler capacity is 200 grams of coffee.
The grinder filler capacity is 200 grams of coffee.
–
–
The maximum time of processing is 60 seconds. Then wait for 10 minutes, which is
The maximum time of processing is 60 seconds. Then wait for 10 minutes, which is
necessary for the drive unit to cool down.
necessary for the drive unit to cool down.
–
–
The coffee grinder is fitted with an automatic thermal cutout protecting the grinder
The coffee grinder is fitted with an automatic thermal cutout protecting the grinder
motor from overheating. Should the cutout have tripped, switch the coffee grinder
motor from overheating. Should the cutout have tripped, switch the coffee grinder
OFF and leave it to cool down for about 20 minutes. After that time, you can
OFF and leave it to cool down for about 20 minutes. After that time, you can
continue using the coffee grinder as described in the operating manual.
continue using the coffee grinder as described in the operating manual.
If the coffee grinder does not work after having been connected to the el. outlet,
If the coffee grinder does not work after having been connected to the el. outlet,
contact the service department.
contact the service department.
–
–
After use, unplug the grinder from the mains.
After use, unplug the grinder from the mains.
–
–
To avoid danger in case of damage to the flex, a damaged flex must be repaired or
To avoid danger in case of damage to the flex, a damaged flex must be repaired or
replaced by the manufacturer, its service engineer or a similarly trained person.
replaced by the manufacturer, its service engineer or a similarly trained person.
–
–
Do not wind the power cord around the appliance; this will extend life of the power cord.
Do not wind the power cord around the appliance; this will extend life of the power cord.
–
–
The power cord must not be damaged with sharp or hot objects, open fire; it must not be
The power cord must not be damaged with sharp or hot objects, open fire; it must not be
sunk into water or bent over sharp edges.
sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang
over the edge of a table or work tables. Hitting, stumbling over or pulling the power cord
e.g. by children can result in tilting over or drawing the appliance down and serious injury!
–
The producer does not undertake any responsibility for damage caused by improper use
of the appliance (e.g.
food deterioration, injury caused, fire,
etc.) and its guarantee does
not cover the appliance in the case of failure to comply with the safety warnings above.
II. DESCRIPTION OF THE PRODUKT (Fig. 1)
A
–
Grinder
A1
–
coffee beans container
A6
–
outlet opening
A2
– grinding selection regulator
A7
– grinding stone (assembled) - fixed
A3
–
selection dial for number of cups
A8
–
ground coffee container’s cap
A4
–
ON/OFF button
A9 –
ground coffee container
A5
–
coffee beans container
A10 –
power cord!
B
–
Cleaning brush
Notice
–
Ensure good quality of coffee. We recommend that you check
coffees for presence of any foreign objects before milling
(e.g. fragments of stones) which could damage the product (e.g.
abrade the grinding discs). Possible complaints within the warranty
period as a result of these impurities will not be taken into account.
–
Never adjust the coarseness of grinding while the drive unit is running!
If the
grinding selection regulator is too stiff, press the button ON on the grinder while rotating
the grinding selection regulator at the same time. This allows the ground coffee caught
between the grinding stones get out of the appliance .
–
Continuously check the coffee quantity in the container because the outlet opening
could be blocked with ground coffee container
A9
. If such a situation occurs, the grinder
is shut down automatically for safety reasons.