Button
Operating the device
Continuous lighting ON/OFF
• System can be switched ON or OFF, independently of motion or ambient brightness, for 12 hours max.
• NB: To prevent tampering, the continuous lighting OFF function is disabled in the factory settings. Activation
is only possible during the self-test. Switch the power supply on and press the
button during the self-test.
The continuous light OFF function is now enabled.
• To disable this function, press the
button during the self-test. (Resets factory settings).
Operating continuous light mode ON/OFF
• Continuous light mode OFF disabled – Every time the button
is pressed, the light switches ON for 12 hours.
• Continuous light OFF enabled – Pressing the button once switches the light ON for 12 hours. If the
button
is pressed again, the light will switch OFF for 12 hours. Press the
button again to switch the light
OFF – ON – OFF – ON.
• NOTE: After the maximum 12-hour „Permanent ON/OFF“ period has expired, or if the
button is pressed,
the detector will switch to Automatic mode.
Storing the current light intensity value
• Stores the current light intensity value. To overwrite this value, turn the LUX switch or press
the
button again.
Cancels the time settings / 12 hours ON/OFF
Reset
• Cancels the time settings. Exits continuous lighting ON/OFF.
Reset – During the self-test (after switching the power off).
• Resets the device to the default settings. Cancels all values set by remote control and resets all functions.
The device operates according to the preset factory settings (10 lux/2 min.).
NB: If the Continuous light OFF function is used further, it must be re-enabled.
GB
13
Summary of Contents for EM10041006
Page 1: ... MD W200i ...
