18
2. SETTINGS
Tap in the app menu on
„SW Learning“
.
Tap at first on
„Begin learn“
.
Now press a button or operate a controller on the
steering wheel remote control.
After receiving the signal, select the appropriate
function on the control panel.
Repeat the two previous steps until you have
learned all the functions. If a function has been
taught in, a blue mark appears next to the symbol.
Complete the teaching with „End learn“ and exit
the menu.
2.7 STEERING WHEEL REMOTE CONTROL
Important note: If the ESX device does not receive any signals from the steering wheel remote
control, check whether it is correctly connected to the device. Some vehicles are not compatible.
The ESX device is CAN bus compatible, but for this you need a corresponding vehicle-specific
CAN bus adapter or a CAN bus module. Then teaching in the steering wheel remote control is
not necessary.
Summary of Contents for VN930
Page 33: ...33 NOTES ...
