20
iPod™
(optional)
Make sure that the iPod™ is properly connected to the device
via the supplied cable. This cable allows also the connection of
an iPhone™ (until 4S) to use its built-in audio playback mode.
The battery is charged via the connecting cable when the de-
vice is switched on. With older iPod ™ models, it may occur,
that they will not be detected, after the device was switched
off. Disconnect and connect again the iPod ™ in this case.
The user interface is modeled like the user interface of the iPod™. You get access to the iPod™ its contents
and playlists through the lower control panels. By tapping „MENU“ you can make the desired playback settings
such as „Shuffle“ or „Repeat“.
Movie
After you have tapped on „Movies“, the file manager will open.
Select then a movie file either on the local hard drive or the
USB stick or the inserted microSD card.
If a movie isn‘t playable, the codec or file format of the file is
not compatible with the device.
Supported video formats: MPEG 1/2/4, AVI, WMV, DivX, H.264
Tap on „Options“ to perform file operations.
Tap double on the file to start playback.
Tap on the screen to display the movie control
panel during playback. Pull or push the pro-
gress bar to change the playback position.
BASIC FUNCTIONS
Please avoid disconnecting the iPod/iPhone™ during operation. This could cause a sys-
tem crash.
