18
INTENDED USE
DISPOSAL
INSTALLATION
• You will find a cutout template in the scope of delivery, which you can use to mark the amplifier opening
in the housing.
• Then connect the subwoofer to the amplifier module. Make sure that the polarity is correct. Refer to the
next page for the
minimum load impedance
of the subwoofer (s).
• Then use the six enclosed screws to attach the amplifier module to the enclosure.
• This product is only designed for the use in a vehicle with 12 volt on-board voltage with negative ground
and functions as an amplifier for audio signals. In principle, this product should be used for installation in
subwoofer enclosures.
• Please use the product only in its intended manner. Any other use may lead to damage to the product or
in the vicinity of the product.
If you have to dispose of the device, please note that no electronic devices may be disposed of with
household waste. Dispose of the device in a suitable recycling facility in accordance with local waste
regulations. If necessary, consult your local authority or your dealer.
LOW PASS
FUSES
25 A
CLIP
AUTO
TURN-ON
PHASE
SHIFT
REMOTE
HIGH LEVEL
INPUT
EPS
LOAD
INPUT
VOLTAGE
SIGNAL
DC
REM
PRO PWR
SUBSONIC
LEVEL
BASS BOOST
LINE INPUT
L
R
MIN
MAX
MIN
MAX
5 Hz
35 Hz
180°
0°
40 V
10 R
150 R
600 R
L
R
15 V
25 A
+12V
REM
GND
40 Hz
120 Hz
AUDIO DESIGN GMBH · AM BREILINGSWEG 3 · D-76709 KRONAU
CLASS D AMPLIFIER
Summary of Contents for POWER4
Page 1: ...CLASS D AMPLIFIER...