SAFETY INSTRUCTIONS
Before you begin with the installation, please attend the following advices in
this manual. Otherwise the risk of injury or a damage of the device consists.
The power capacitor is equivalent to common directives to be operated in vehi-
cles inside the European Union and owns a CE-mark.
The capacitor should be installed by qualified and skilled personnel only. Spe-
cial carefulness is essential, because in case of short circuits hazardous high
currents could occur.
The power capacitor stores an extremely large amount of electricity and may
explode or cause serious injury. If the device is used for other purposes than
originally intended or if not proper used or installed, personal injury or material
damage could occur.
The capacitor should be mounted at a mechanically stable position in the vehi-
cle. The device should be fixed properly and professional.
At no time the power capacitor should be exposed to voltages higher than
specified (max. 18 Volts) or its terminals shorted directly.
Protect the capacitor against humidity and heat.
DANGER!
ELECTRIC
SHOCK
INTENDED USE
This device is only suitable for the operation in a vehicle with an on-board
voltage of 12 volts, negative ground.
SPECIFICATIONS
Rated Capacity:
1,5 Farad
Operating Voltage:
12-15 VDC
Operating Temperature:
-20 ~ 60°
Dimensions:
Ø 74 x 245 mm
SCOPE OF DELIVERY
1 x Power Capacitor
2 x Mounting Bracket
8 x Screws
1 x Charging/Discharging Bulb
1 x Manual
