Eswing ES6 Comfort, User Manual, Page: 23 / 27

6. Maintenance 6. Maintenance
6.2 ES6 battery is made of lithium-ion battery cells, with multiple protection function on the PCB board, and passed the UN/IATAUN38.3 air
transport test obituary identification, 1.2 meters drop testing, certification and ULcertification. Normal use and even collisions will not cause the
battery pack to fire or explode. For safety reasons, piercing and smashing the battery pack are prohibited; do not drop the battery pack into
the fire or water, otherwise that will cause danger or environmental pollution. Most of the airlines and well-known courier companies (such as
UPS,TNT, DHL, etc.) can transport the battery; however a valid UN38.3 test report and some other test certification are required. Users can
contact Eswing customer service department to get these test reports and certifications. Please pay attention to the air transport norms and
updates from different countries, airlines and airports.
6.3 Screw mounting and removal techniques
ES6 adopts high strength anti-loose screws.Please follow the following rules for the
installation to avoid damage to the screws. When using the six angle wrench, it must be
pushed to the bottom of the screws.
1. Mounting screws in staggered order;
2. Do not fully tighten screws at beginning;
3. Mount all screws on and then tighten.
6.4 Check screws
All the screws of ES6 are treated with anti loosing function. For the safety reasons, please regularly to check the wheel hub, lean-steer,
battery, fenders, tread plate shell and control panel shell and other components in ES6 store. By DIY, to shake the components with handle
gently, observe the component is subsequently shaking or loosening of the abnormal sound; if users feel screws loose, please check related
components mounting screws and use with the tool attached to the products of the fastening.
6.5 Check tyre pressure
Es6 normal tyre pressure should keep around 0.8~1.5 Kg/cm² (80~150Kpa), max to 2.5Kg/cm² (250Kpa). Higher tyre-pressure will decrease
friction resistance and increase the whole cruise, but makes more damping during riding. While, lower tyre-pressure could makes
less dampling during riding on the stuff road, but decrease the whole cruise. Whatever higher or lower tyre-pressure, it expedites the
abrasion to the rubber tyres.
6
.
6 Replace the tyres
Abrased tyres influence riding safety to ES6,we suggest to replace the tyres in time when the textures on the tyres are evened off less -
1mm than the texture.And, when anyone tyre was punctured, you need to replace a new tyre immediately.
ES6 are made with a special tyres, which could not be disassembled by normal tools, otherwise it would probably be damaged.
We suggest you go to ES6 store to replace tyres.
If you don't like to go to the store, or there's no store nearby you, we suggest you to change the whole tyre system includes the wheels.
Steps of disassembly tyres and wheels:
1. Raise ES6 onto a box off-grounding the tyres,
and dismount the rim cover in the middle of wheel;
2. Loose 4 screws on the wheels with 17mm sleeve;
3.Take off the tyres and wheels together.
Sleeve
40 41