Eswing ES6 Comfort, User Manual, Page: 13 / 27

3. Function introduction 3. Function introduction
3.7 Power button, charge port and USB port
At the mainframe back of ES6, there is a USB charging port which supports standard USB equipment and provide 5V/1Acurrent.
You can charge the infokey controller or other USB devices with input <150mAcharging.
Picture 1: Power button, charge port and USB port position
Power button
3
.
8 Charging method
1st step: Find the charging port at the back of ES6 main frame, open the backcover,
to check if the charging port is dry firstly.
2nd step: Connect the charging port with the charger (100~240V, global common),
then plug it into the powerAC supply.
3rd step: When the LED indicator on the charger turns red, which means the scooter is
charging normally; when the indicator turns green, the scooters is charged fully and
please stop charging, unplug the charger port to save the battery life.
Charger port
USB port
3
.
9 Parking stand
Some models of ES6 are equipped with a parking stand. When you get off the scooter,
you can release the parking stand down, ES6 can stand upon the ground.
You can also purchase additional parking stand and mount it by yourself.
This USB port is effective only when ES6 is on. It can only supply power, at the maximum current of 5V/150mA, no any capability to transmit
data. Do not plug in any USB device with current higher than 150mA(for example, do not use it to charge such device having high current
demand such as iPad). If high current demand device connected, it may cut off the power and influence the safety of riding.
Releasing down the parking stand is only allowed in off mode, lock mode and standby status.To avoid improperly operating to the parking
stand, we strongly recommend you turn off completely or lock ES6 if you need leave it alone. We also recommend you not to strand on or
ride ES6 when release down the parking stand, which will be easily damaged and cause the rider fall down.
20 21