9
4.4.5. Alternate flasher mode
In this mode, the outputs Out A and Out B of an output pair are
switched on alternately with an adjustable flashing frequency. The
alternate flasher is started with the command „Straight/Green” of
the assigned button and stopped again with the command „Di-
verging/Red”.
Optionally, the output can also be slowly dimmed up and dimmed
down (so-called „zoom” for incandescent lamp simulation).
The alternating flasher operation is ideal for illuminating St.
Andrew´s crosses at level crossings.
Figure 4: Alternate flasher mode
keyboard
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
time
on
off
1
RED
ON
1
RED
OFF
1
GREEN
ON
1
(GREEN
ON)
(Lenz)
1
GREEN
OFF
Flash-Time
Flash-Time
Flash-Time
Flash-Time
Stop
Operating modes
Summary of Contents for SwitchPilot 3 Plus
Page 35: ...35...
