46
18. Accessories
You will get detailed information regarding accessories at your
dealer or on our homepage.
18.1. Switching the Centre pick-up
The circuit board 51966 for switching the centre pick-up only for
the decoder with the 21MTC interface is intended for vehicles
with two pick-ups. Thus, you can activate the forward pick-up in
the direction of movement. This is ideal for block control!
18.2. HAMO Magnets
One cannot drive the universal motors in many Märklin® models
directly with a LokPilot decoder. Firstly, you must replace the
stator coil with a permanent magnet. ESU supplies the following
magnets:
51960
Permanent magnet as 220560, for rotor 217450,
D=24.5 mm, for motor plate 216730, 211990, 228500
51961
Permanent magnet as 220450, for rotor 200680,
D=18.0 mm, for motor plate 204900
51962
Permanent magnet as 235690, for rotor 231440,
D=18.0 mm, for motor plate 231350
18.3. Wire Harnesses with 8-pole or 6-pole Socket
If the locomotive you want to convert does not have an interface
and you do not want to remove the plug from the decoder then
you can use the harness 51950 or 51951: first install the suitable
harness and then plug in the decoder.
18.5. Mounting Adapter 21MTC
If you wish to convert a locomotive with a LokPilot decoder with
the 21MTC interface, the adapter plate 51967 comes in handy:
it has a socket for plugging in the LokPilot but also has solder
points for connecting the original wiring of the locomotive. This
is ideal for converting Märklin locomotives.
19. Support and assistance
Your model train dealer or hobby shop is your competent partner
for all questions regarding your LokPilot decoder. In fact he is
your competent partner for all questions around model trains.
Of course, you may also contact us directly. For enquiries please
use either email or fax (don’t forget to provide your own fax-no.
or email address) and we will reply within a few days.
Please call our hotline only in case of complex enquiries that
can’t be dealt with by email or fax. The hotline is often very
busy and you may encounter delays. Rather send an email or
fax and also check our website for more information. You will
find many hints under “Support / FAQ” and even feedback from
other users that may help you with your particular question.
Of course we will always assist you; please contact us at:
United states (English support), please contact
:
Phone:
+1 320 202 0865
Tuesday & Thursday 9:00am - 3:00pm (CT)
Fax:
+1 320 202 0867
Email:
Mail:
ESU LLC
815 60th Ave SE
St Cloud Minnesota 56304
Germany and other countries, please contact:
Phone:
++49 ( 0) 700 – 56 57 68 63
Tuesday & Wednesday 10:00am - 12:00am
Fax:
++49 ( 0) 700 – 37 87 25 37
Email:
Mail:
ESU GmbH & Co. KG
- Technischer Support -
D-89081 Ulm
Website:
www.esu.eu
Accessories & Support and assistance
Summary of Contents for LokPilot Fx micro V3.0
Page 69: ...69 For your personal notes ...
