1 General information
1 General information
Than you for choosing our product. We congratulate you on making a good decision. We
welcome any remarks on the operation of device.
Team
ESTYMA electronics
1.1 Introduction
VIDE GSM communication module is a multifunctional device designed for remote
access to the information of module sensors and controller of hot water boiler by means of
GSM network.
The module is equipped with two slots of temperature sensors, two slots for contact
input and output and CAN interface. Configuration, user-friendly panel makes it possible to set
SMS notices about important changes in the operation of sensors, such as:
•
exceeding the range of room temperature allowed
•
alarm when the input contact is closed or open, used for giving notice about the
opening/shutting of doors, gates, garages.
Contact output (binary), makes the remote activation/disconnection of any electrical
equipment possible. Using mobile, you can also read out current parameters of module as well
as make chnages in settings.
By means of CAN interface, the Vide GSM module can remotely control the operation of
heating controller of IGNEO line, and make changes in the operation modes of boiler, burner
and 16 central heating circuits at most. The GSM communication system makes it possible to
make several changes in the controller operation and to read out current parameters displayed
on your mobile by sending SMS.
1.2 Elements of the set
1. Vide GSM module
2. 2x sensor of room temperature CT2a / 2.4
3. Power unit
page 4
PL20130524
Summary of Contents for Vide
Page 1: ......
Page 2: ...page 2 PL20130524...
