4 Handling
4.4 Time scheduling
Controller is equipped with a clock and calendar. This makes it possible to program the
operation of individual circuit elements for heating depending on the time and day of week.
Date and time are not reset during a power failure, because the controller is equipped with a
battery that should be replaced every two years.
Programming takes place in the menu of the circuit (eg, hot water, heating, buffer) and
for each item carried in the same way.
Selecting the day of week.
Upon entry in the "Programme Time" day of the week
flashes. Arrow buttons to select the day you want to set or just check the settings of the
program.
Programming.
After selecting the day of week and approved "ENTER", indicator being
programmed hours flashes. At the same time also displays the time, and the next to it icon
that represents the currently selected setting time (the symbol of the sun means comfort
temperature, the moon is a symbol of the economic temperature.) To move to the next hour,
press the down arrow (economy temperature) or the up arrow (comfort temperature). If the
day is already programmed in accordance with our wish, press "ENTER". After approved the
changes (or cancellation) will blink day of the week.
The figure shows an example of the preset day of the week.
Temp. economy from 00:00 to 6:00
Temp. comfortable from 6:00 to 9:00
Temp. economy from 9:00 to 18:00
Temp. comfortable from 18:00 to 24:00
WARNING !!!
Values of temperatures comfortable and economical are set in the
“SETTINGS” menu and may be different for each of the circuits. To make the time program
work, you must also enable a timed mode in the “SETTINGS” menu.
estyma electronics
www.estyma.pl
page 19
PL20110629
