Estun E200P, Operation Manual

Page: 13 / 25

E200P Operation Manual
11
3.2 Operation Flow
Power
on
Single-Step Manual Single Run
Programs Mutil-Step Mutil-Step Run
CONST
System
Parameter
DIAGNOSE
IO MONITOR YV MONITOR
ALARM
RECORD
Password: 14789 Password: 5656
P
Press Press
l Press
l
Press
Press
Press
Press Press Press
Press Press Press
Press
P
Press
P
Press
P
Press
TchIn PARA
Password: 1212
CONFIG PARA.
Password: 36987
P
Press
Figure 3-1 Operation Flow
3.3 Single-Step
In the actual processing, operator user pedal switch to control the bending
process. Because of the SINGLE page has simple and direct parameter, it more
suitable for the bending operation just only one-step.
When the E200P device is electrified, wait a few seconds into the SINGLE page
(Default page), as shown in Figure 3-2.
[Operation guide] :
 Press to select the parameter you want to modify, input the
value and press to finish the operation.
 After finishing the editing, press to run the machine, the page on the device
enters to RUN page.
 Press to stop the machine. The page on the device enters to SINGLE page.