Estia 06-12014, Manual

Page: 14 / 15

14
Rated voltage 220V~
600W
50Hz
20000 rotates/minute
2 minutes
2 minutes
Rated power
Rated frequency
Rotate speed
Juice function of continuous working
time
Interval time
Problem Cause Handling
Some parts of the appliance might not be
installed correctly.
Normal phenomenon of new motor
1. Low voltage
2. Overload with ingredients
3. You pressed the pusher too hard
4. Shutdown operation due to high motor
temperature
1. The blade net is not installed properly
2. The food is not properly placed into the
feeding tube
3. Voltage overtention
4. Overload with ingredients
1. Excessive residue of pulp
2. Overpressure of push rod
If it persists aſter a few uses, seek help of a qualified
technician
1. Check if the voltage is low
2. Remove some of the ingredients
3. Press the pusher gently
4. Wait 20-30 minutes until you
1. Place the blade net correctly
2. Place a smaller quantity into the feeding tube
3. Check if the voltage is high
4. Pause and remove the ingredinets
1. Clean the juicer tray
2. Press the push rod gently
Follow the installation instructions in the appropriate
section and install the parts correctly. The appliance is not working even
if you connect it to the socket
Motor emits odor
Shutdown while in use
Abnormal vibrations or noise
Less juice
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any time in future you need to dispose of this
product please do NOT dispose of this product with household waste. Please send this product to WEEE collecting points where available. In order to fulfill ruling UNE EN-60335,
we indicate that if the flexible wire is damaged, it can only be substituted by a technical service recognized bv authorised organization, as per special tooling is required.