Battery Charging
Charge before first use. Insert USB connector into port in
computer or other 5V USB charger port. Blue LED slowly
blinks. Charging time is two to three hours.
Video Camera Usage
Still Picture Usage
To Turn Camera On:
Press ON/OFF button for two seconds.
Blue LED light will stay on.
Press ON/OFF button quickly two
times. Blue LED will blink indicating a
photo has been taken.
LED Light Indicator
Set Date and Time
When new from factory or when using a brand new memory card,
start by doing the following. Press ON/OFF button for two
seconds. Blue LED light will stay on. Press ON/OFF button for two
seconds to turn camera off. This procedure will create the files
needed on the memory card for the next step. Insert USB
connector into USB port on computer. Select the drive letter that
corresponds to the removable storage device. Open the time text
document (time.txt). Change the date and time numbers to your
current date and time. You must use the same format as
displayed year/month/day. Click on “File”, click “Save”, click
“File”, then click “Exit”. Remove camera from USB port. Turn on
camera, turn off camera. Your videos should now display the
correct date and time.
To Turn Camera On:
Press ON/OFF button
for two seconds. Blue
LED light will stay on.
No Memory Card:
Light shuts off after
blinking three times.
Low Battery:
Light will turn off
after one half
second. After two
attempts to turn on
camera, light will
turn off and stay off.
Charge Battery:
Light blinks slowly.
When fully charged,
light remains on.
Video Recording:
Light blinks.
Standby:
Light stays on.
Memory Card Full:
Light shuts off after
blinking six times.
To Begin Filming:
Press ON/OFF button.
Blue LED light begins
blinking.
To Stop Recording:
Press ON/OFF
button. Blue LED
light stays on.
To Turn Camera Off:
Press ON/OFF button
for two seconds.
Blue LED will blink
slowly 3 times and
power off.
ON/OFF
BUTTON
BLUE
LED
BLUE LED
LIGHT
1.
2.
3.
4.
