29
NB!
The listener’s experience is crucial in adjusting the speakers’ upper
modules and tweeters positions. In addition, each room has its own
characteristics, therefore please refer to the above suggestions as
general guidelines.
During the final set-up, small adjustments may be made to
the initial chosen position, e.g. moving the speakers 10 cm towards the
front wall, etc. Please evaluate the sound carefully every time you make
a small change in the positioning. Continue making small changes in
the positioning and evaluate again until the proper position with a
balanced, natural sound is found. We suggest that you test and listen
to various musical pieces from different genres to avoid specific sonic
accents.
NB!
For the small adjustments in positioning use the lift cart.
Before critical listening, please allow 60-90 minutes of
playback for system stabilization. When listening at an excessive
volume you risk damaging the drivers.
NB!
When the sound is set up, please remove the power supplies so
there’s no electromagnetic interference.
4.4.1. Troubleshooting
When the speakers are not detected by the remote control,
or when there is a lack of functionality while adjusting the upper
modules and the tweeters, then reset the remote control by holding
down the left and right arrows simultaneously for 5 seconds. The
remote control will restart and will connect with the 2 speakers. If
resetting the remote doesn’t fix the issue, then remove the DC power
supply from the speaker and connect again. Then reset the remote
control again.
