4
Check the brew basket is assembled correctly. The wire rack must wedge firmly at the
bottom of the brew basket.
1. Place the brewer on a dry, firm and horizontal surface with plenty of room above to
allow easy and safe connection to the water source.
2. The coffee maker must be connected to a cold water system. Plumbing one side of inlet
tube into the water source and the other side of tube connects to the solenoid
. Then,
switch on the water source step by step.
3.
4. Place an empty server at the correct position under the brew basket.
5. Plug the machine to the power source and turn on the main power switch on the rear
cover for 236ECSB1 model. (some models do not have main power switch on the rear
6.
7. Wait approximately 15 ~ 20 minutes for the water in the tank to heat and reach the
setting temperature, the screen display will show “Ready to Brew, watertemp.: ºF’’
when the tank has reached operating temperature. Some water will drip from the
sprinkler holder during this period because of thermal expansion and contraction
temperature. (When facing this issue, please place a small container under the faucet
working again.)
8. The coffee maker is now ready for use.
9. During above operation, it is normal to hear some brewing, pumping sounds and see
some water vapor coming out of the machine.
CONDITION
MINIMUM
MAXIMUM
Total Dissolved Solids
50 PPM
125 PPM
Total Hardness
3 GPG
5 GPG
pH
6.5 pH
7.5 pH
Free Chlorine
---
0.5 PPM
Total Chlorine
---
1 PPM
INSTALLATION
A qualified water filter or softer water must be
used or the warranty will be voided.
!
WATER GUIDELINES
