/195M (TNB)
USER’S MANUAL
Revised: 30 Jan 2018
5 of 10
Figure 5: Discovery Found Radio
5.
If changes were made to the IP address, you will need to press the
Discover EST Radios
button again to show
the changes. Right-mouse click on the radio and select
Configure Radio
button to begin programming.
Figure 6: Opening Radio Configuration Software
195M Configuration Page
The Configuration Page is the default page entered
when the 195M Configuration Utility is opened. If
the utility was opened through the Discovery
program, the current configuration parameters for
the modem will be displayed (Figure 7). If the 195M
information is not displayed, press the
Read Config
button to continue.
The majority of the radio’s configuration can be
entered from the Configuration tab. Setting the
modem’s address, destination, frequency, port
settings and operating mode are all available from
this single page. Any changes made on the
configuration menu will be saved to the listed 195M
when the
Write Config
button is pressed.
Figure 7: Configuration Tab
