ESTeem 195Ep Quick Start Manual Download Page 4

APPENDIX G

QUICK START GUIDE

 

 

Revised: 14 Jun 06 

APX G-4 

EST P/N AA107G 

 
2.

 

The Model 195Ep will link to other Model 195Ep’s on the network via the WLAN Media Access Control (MAC) address 
found on the bottom of the case.  This MAC address is six hexadecimal digits separated by colons and is configured at the 
factory.  Every MAC address in the world is unique and can not be changed.  Complete the following chart to aid in your 
configuration: 
 

Name 

Serial Number 

IP Address 

Ethernet MAC 

WLAN MAC 

Example Modem 1 

E-14001 

 

172.16.8.101 

00:04:3f:00:01:01 

00:04:3f:00:01:02 

 

 
 

 

 

 

 

 
 

 

 

 

 

 
 

 

 

 

 

 
 

 

 

 

 

3.

 

Configuration of the Model 195Ep is completed through the product’s internal web server.  To access this configuration page, 
you will need to enter the 195Ep’s IP address in your web browser.  The IP address set at the factory is Class B (i.e. 
172.16.x.x) address and is printed on the Quality Assurance sheet sent with each 195Ep.  If the factory default address 
matches your network configuration, please proceed to 

Using Setup, 

otherwise continue to step 4. 

 
4.

 

Install the ESTeem Discovery Utility

.  The ESTeem Discovery Utility will allow you to configure the IP address on the 

Model 195Ep to match your network.  Install the Discovery Utility on your computer by inserting the Resource Disk in your 
CD drive. 

Note: The ESTeem Resource Disk is stand-alone copy of the ESTeem Web site (Figure 1).  Navigation of the Resource Disk is 
as simple as using your web browser.  All technical documentation, User’s Manuals and the ESTeem Utility Program is 
available on the disk. 

 
Place the ESTeem Utility CD in your CD-ROM drive.  The CD will auto load the ESTeem main page  

Note: If the page does not auto load, open your web browser and set your address line to D:\1_default.html (Where D: is the 
drive letter for your CD-ROM drive).   

 

From the Main Page select ESTeem Utilities and click on Download ESTeem Discovery Utility.  
 

 

Figure 1 –ESTeem Resource Disk Main Page 

Summary of Contents for 195Ep













Reviews: