ESTeem 195Eg User Manual Download Page 3

COPYRIGHT INFORMATION

This manual and the firmware described in it are copyrighted by EST, with all rights reserved.  Under the copyright laws, this manual or the
firmware internal to the ESTeem unit may not be copied, in whole or part, without the written consent of EST.  Under the law, copying
includes translating into another language.

Electronic Systems Technology (EST) cannot guarantee that you will receive notice of a revision to the firmware described in the manual,
even if you have returned a registration/warranty card received with the product.  You should periodically check with your authorized EST
dealer or call factory direct.

EST and the EST logo are registered trademarks of Electronic Systems Technology, Inc.  Simultaneously published in the United States
and Canada.  All rights reserved.

WARRANTY INFORMATION

Electronic Systems Technology, Inc., (hereinafter EST) expressly warrants its products as free of manufacturing defects for a period of one
year from the date of sale to first user/customer. 

THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED AND THERE IS EXPRESSLY EXCLUDED ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  NO OTHER WARRANTY GIVEN BY ANY EMPLOYEE, AGENT,
DISTRIBUTOR OR OTHER PERSON WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON EST.

LIMITATION OF LIABILITY:

 EST's liability shall be limited to refunding of purchase price, repair or replacement of product. 

 IN NO EVENT SHALL EST HAVE LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES
CAUSED DIRECTLY OR INDIRECTLY BY THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY INTERRUPTION OF SERVICES,
LOSS OF BUSINESS OR ANTICIPATORY PROFITS.  IN NO EVENT SHALL EST BE LIABLE FOR ANY DAMAGES WHATSOEVER IN
EXCESS OF THE PURCHASE PRICE OF THE PRODUCT.

In the event that a unit or part requires replacement or factory servicing, the following conditions apply:

a)

Customer must obtain from EST an authorized RMA (Return Materials Authorization) number (call 509-735-9092 Customer Support)
before shipment of product or parts to EST for any reason;

b)

If the whole unit is shipped, it must be in its original carton and shipping components, or a carton and shipping components supplied
by EST, or if parts only are shipped, they must be packaged and cushioned so as to prevent damage in transit and shipped freight
prepaid;

PRODUCT WILL BE CONSIDERED OUT OF WARRANTY IF:

a)

If the product is damaged due to improper or abnormal use, abuse, mishandling, accident or improper maintenance or failure to
follow operating instruction;

b)

If the product is defective as a result of sand, dirt, or water damage;

c)

If any factory-sealed enclosure has been opened or shows evidence of an attempt to be opened;

d)

If defects or damage are caused by the use of unauthorized parts or unauthorized service;

e)

If the product has had its serial numbers altered or removed.

Warranty repair form must be accompanied by proof of user's purchase of unit.  Product must be shipped to the manufacturer at the
following address:

Electronic Systems Technology
415 North Quay Street
Kennewick, Washington USA 99336

ADDITIONAL SERVICE:

 

If EST releases an improvement update to firmware internal to the ESTeem unit during the 90 day period after the unit was purchased by the
first user/customer, EST will update the applicable unit with the revised version at no charge other than for UPS handling and shipping to and
from your location to the EST factory.  Return of any such item must be accompanied with proof of purchase.

Summary of Contents for 195Eg




















Reviews: