10
11.
Configure the repeater peer list by
selecting Enable the repeater
capability radial to YES (Step
11). Press the Add button to the
right of the repeater peer table
and, using the chart created in the
Begin Programming section of
this guide, enter the Wireless
MAC (WLAN MAC) address of
the opposite 195Ed (the 195Ed
this unit you are programming
will communicate with) in the
Peer 1 – MAC Addr field
(below). Leave the Priority Path
Cost settings at the default values,
Encryption Type to None and
change the Enable Link radial to
Enable and press the Create
Repeater Peer button. Press the
Next button.
Step 11 – Repeater Peer Configuration
Example Addresses
Name
Serial Number
IP Address
Ethernet MAC
WLAN MAC
195Ed We Are
Programming
E-14096
172.16.48.189
00:04:3f:00:01:01
00:04:3f:00:01:02
Opposite 195Ed We
Will Create Wireless
Link
E-14034
172.16.38.114
00:04:3F:00:0B:00
00:04:3F:00:11:02
Step 12 – Configure Peer Table
