
APPENDIX G
UTILITIES & FEATURES
Revised: 30 Jun 08
APX G-7
EST P/N AA107D
2.
Press the next button and Figure 11 will be displayed. At the bottom of the page are the NTP server configurations.
3.
The NTP daemon is enabled by selecting YES for NTP ENABLE (Figure 11). When enabled, the NTP daemon will use
time services from upstream services to keep the time on this system accurate.
4.
Next, the NTP SERVICE ENABLE should be configured to “YES,” if you want to allow the system to provide NTP
service for clients wishing time synchronization (Figure 11).
5.
The final step in configuring NTP services is to enter the IP address or the host name of the upstream NTP server.
Figure 11: NTP Settings